Signed in as:
filler@godaddy.com
ALL MADE IN THE USA Telescoping Titan Flagpole
Frequently Asked Questions
Please reach us at blueskyflagpole@gmail.com if you cannot find an answer to your question.
Our 2 ½” flagpoles come with a high quality 3 X 5 US Flag and the 3” HD poles come with a high quality 4 X 6 US Flag.
All of our flagpoles come with the hardware installed to fly 2 flags.
Yes you can. Simply remove the US Flag and attach it to the flag snaps where a second flag would normally be displayed and extend the pole.
All of our telescoping flagpoles are made and assembled in either Paynesville, MN or Meridian, ID. These are our flagpole factories.
All of the flag harness and interlocking assembly inside the pole have a lifetime warranty. The pole itself has a 7 year warranty against defect in workmanship, ie. Discoloring or rust.
It’s super easy! Installation typically takes approximately an hour. The Titan Telescoping Flagpole Kit includes the ground sleeve needed for installation. The ground sleeve is made of ABS plastic, which holds up to whether elements much better than PVC pipe. To install, you simply dig a fence post size hole that is 28” deep x 14” in diameter. You’ll need about 240 lbs of concrete and a small amount of pea gravel (4” at the base of the hole). Detailed installation instructions (with pictures) are included in the Kit.
Our 20’ & 25’ heavy duty poles are good in winds up to 95 mph (with up to two flags not larger than 4’x6’ attached). Our lighter duty 15’ & 20’LT poles are good in winds up to 75 mph (with up to two flags not larger than 3’x5’ attached).
Except for the concrete, the Kit comes with everything you need to get your pole installed and operational. It comes with one Titan Telescoping Flagpole (assembled), a Premium Nylon US Flag with sewn stars and reinforced box stitching at the fly end (4’x6’ for 20’ & 25’; 3’x5’ for 15’ & 20’LT), the Gold Ball Ornament, and the Ground Sleeve necessary for installation. In addition, every Titan Telescoping Flagpole is pre-equipped to fly up to two flags.
Our biggest differentiator is the patented internal interlocking sleeve mechanism that we use to raise, lower, and lock the pole into place. This interlocking sleeve mechanism makes it very easy to raise and lower each section, while providing outstanding stability at each joint once it is locked into place. Most others use either a “screw-in” or a “push button” system at each joint. Those systems tend to be less reliable over time, as they are more likely to succumb to windy conditions, or they simply become faulty through normal wear and tear.
20’ – Installed height is 20’. It is rated for 95 mph winds. The base is 3.0” in diameter, with a 12-gauge wall thickness. It is a 4-section pole (3 joints). The pole comes with a premium 4’x6’ Nylon US Flag. 20’LT - Installed height is 18.5’. It is rated for 75 mph winds. The base is 2.5” in diameter, with a 14-gauge wall thickness. It is a 3-section pole (2 joints). The pole comes with a premium 3’x5’ Nylon US Flag. The LT is an abbreviation for light duty.
Tubes – The anodized aluminum tubes will not rust, nor will they scratch or chip like a painted or powder coated pole. The base section of the 20’ & 25’ poles are 3” in diameter and have a 12-gauge wall thickness. The base section of the 15’ and 20’LT poles are 2.5” in diameter and have a 14-gauge wall thickness.
Swivel Rings – All of our flagpoles are equipped to fly two (2) flags. The flags attach to a spring clip which is attached to a Swivel Ring system. This allows the flags to rotate 360° around the pole to help prevent wrapping.
Lexan Plastic – The internal interlocking sleeve mechanism, together with the swivel rings are a Lexan plastic material. Lexan is a polycarbonate resin thermoplastic. In layman’s terms, it is extremely strong, and can withstand extreme temperature variations.
Half-Staff – To fly your flag at half-staff, simply move the flag from the top position to the lower position on your flagpole. Extend the pole to its full height. You’ll be at a perfect half-staff position.
Mobility – With our installation process, only the ground sleeve that comes with the pole is permanently installed in the ground. Accordingly, you have the flexibility to take your pole with you should you ever move. Moreover, you can take the pole with you for outings such as a camping trip or tailgate party. Mounts are available for those purposes. Finally, if you know extreme weather is on the way, you can remove the pole from the ground sleeve and store it in a safe spot until the weather passes.
The single biggest reason is that you never have to worry about getting to the top of the pole again. The top retracts down to you. All the headaches associated with replacing the rope, fixing the pully, or adding an ornament to the top of the flagpole are eliminated with a telescoping flagpole. There are also many other factors that favor the telescoping flagpole such as price, ease of use, and mobility.
Blue Sky flagpole
39 Spence Dr, Hendersonville, North Carolina 28739, United States
Copyright © 2024 Blue Sky Flagpole LLC - All Rights Reserved.
This website uses cookies.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.